Soil EC transmitter – soil conductivity sensor 0-5V



Product Introduction:

Soil EC transmitter is suitable for measuring the total salt content of soil (electrical conductivity). The soil integrated sensor creatively measures the conductivity, moisture, temperature, ph, nitrogen, phosphorus and potassium, which greatly facilitates the customer’s systematic evaluation of soil conditions. It can monitor the soil moisture of different soil layers quickly, accurately and comprehensively. The best living environment for crops increases yields and greatly facilitates the systematic evaluation of soil conditions by customers.

* Models:JXBS-3001-EC-V05

* Minimum order quantity: 1 piece

* Delivery time: within 24 hours


(1)High protection performance: the use of epoxy resin vacuum filling, high-density epoxy resin is used for high-temperature vacuum filling between the probe and the main body, which can prevent moisture from entering the main body and has better sealing performance. In addition to the assembly part, we also conduct waterproof and dust-proof treatments on the entire body to ensure long-term operation of the components.
(2)Probe: The soil conductivity sensor uses austenitic 316 stainless steel as the raw material for the probe parts. It has the properties of anti-rust, electrolysis and salt-alkali corrosion resistance, thus ensuring the long-term operation of the probe parts. Therefore, it is suitable for various soils.
(3)Internal structure: low power consumption and high sensitivity chip, the soil conductivity sensor uses high-quality chips inside, low power consumption, high sensitivity, and stable signal.


Power supply mode: 12-24V
Measurement principle: FDR
Appearance type: three-pin type
Conductivity measurement range: 0-10000us/cm
Output signal: 0-5v
Power supply mode: 12-24V DC
Storage environment: -45℃-115℃
Response time: <1s
Power consumption: ≤0.15W (@12V DC, 25℃)
Working pressure range: 0.9-1.1atm


1. The steel needle must be fully inserted into the soil when measuring.
2, avoid strong sunlight directly on the sensor and lead to high temperature. Pay attention to lightning protection for field use.
3, do not bend the steel needle violently, do not pull the sensor lead wire, do not fall or hit the sensor violently.
4. The protection level of the sensor is IP68, which can soak the whole sensor in water.
5, because of the existence of radiofrequency electromagnetic radiation in the air, it is not suitable to be electrified in the air for a long time.


1. Quick measurement method
Select the appropriate measuring site, avoid stones, ensure that the needle will not encounter hard objects, in accordance with the required depth of measurement away from the surface soil, maintain the original tightness of the soil below, hold the sensor vertically inserted into the soil, do not shake around when inserted, a small range of a measurement point is recommended to measure the average number of times.
2. Burial survey method
Dig a pit with a diameter of more than 20cm vertically, insert the sensor steel needle horizontally into the wall of the pit at a given depth, fill the pit tightly, and stabilize it for a period of time, so that continuous measurement and recording can be carried out for several days, months or even longer.


Soil EC Transmitter Introduction Manual


There are no reviews yet.

Be the first to review “Soil EC transmitter – soil conductivity sensor 0-5V”

Your email address will not be published. Required fields are marked *

Shopping Cart